Green Products

Bradley and the Environment

Bradmar partitions are made with 30% post industrial recycled HDPE plastic. 100% recycled plastic models are also available. These partitions won't rust or have to be repainted or replaced as often as metal partitions are. This material is resistant to scratches and dents so requires less maintenance. Graffiti, markers and dirt are easily cleaned with non-toxic, biodegradeable cleaners.

Lenox lockers are made with 30% post industrial recycled HDPE plastic. 100% recycled plastic models are also available. These lockers have a 20-year guarantee, so you can be sure they won't end up in a landfill anytime soon. Solid plastic lockers won't rust so they can be used even in high humidity areas. No repainting these lockers every 1-5 years as metal lockers often are.

Bradley's stainless steel washroom accessories and toilet partitions are made from 60% recycled content stainless, while the partitions have 69% recycled content. These products are long lasting and vandal resistant and won't have to be replaced for years to come.

The patented ndite™ powered lavatory system requires no electricity or batteries to power the sensors and activate the water. Normal levels of light in the restroom charge the photovoltaic cells which power the sensors and valves regulating water to the lavs. No batteries have to be recharged or replaced thus saving money and reducing landfill waste.

Bradley's wash-fountains have been 'green' since 1921 when they were first introduced. Wash-fountains save on materials for installation, reduce required floor space, and conserve water and energy when compared to a bank of china lavs.

The aerators on most of Bradley's Aerada faucets are restricted to a flow of 0.5 gallons per minute, thus saving water. Infrared activation on faucets will save water by restricting the flow to a preset time, plus the water will not run unless there is someone using the fixture.

Shower-heads are restricted to use only 2.5 gallons of water per minute, however, flow restrictors on Bradley's shower-heads are set to 2.3 GPM. Several of Bradley shower-heads can be provided with a 2.0 GPM or lower flow restrictor to help meet LEED requirements for water conversation. Showers can be activated with valves that control water usage to a preset time, thus saving water. Shower valves are constructed with advanced ceramic disc technology. With no wearing parts, these valves will last for many years.

Terreon solid surface material lasts a lifetime and can easily be repaired and renewed, thus minimizing the need to replace and dispose of it. Over 96% of Terreon products are completely molded including bowls, overflows, backsplashes and aprons, eliminating fabrication waste and the use of sealants and adhesives. Terreon is non-toxic with virtually no 'off-gassing' of volatile organic compounds (VOC). Terreon is a non-porous material which means that it will not support the growth of mold, mildew or bacteria.

For more information on Bradley's Earth-Smart products, please click here:


HWAT is a sophisticated hot water temperature maintenance system that provides commercial buildings with immediate hot water at the tap without the use of a recirculation system; thus saving on unnecessary water waste. The hot water temperature maintenance system utilizes an electronic controller, self-regulating heating cables, and an easy-to-install set of connection kits.


For more information on HWAT please click here:

Waterless Urinals

Waterless No-Flush™ urinals resemble conventional fixtures, and easily replace them. They install to the regular urinal 2” (50MM) waste line (for 1 ½” (38MM) waste lines, use a reducer bushing). They eliminate flush water supply lines. Flush valves are completely eliminated as well. No handles to touch, no sensors to install or adjust, no moving parts at all!

For more information please click here: